Mercedes-Benz · 5×112 · 66.6mm · UK Made
Mercedes Wheel Spacers.
Hubcentric. UK machined.
Precision CNC-machined hubcentric wheel spacers for Mercedes-Benz and AMG — C-Class, E-Class, A-Class, CLA, C43, C63, E63 and more. One specification fits all. Built to order in Britain.
5×112
Bolt pattern
66.6mm
Centre bore
From £89
Per pair inc. bolts
6082-T6
Billet aluminium
Mercedes 5×112 hubcentric wheel spacers — from £89 per pair, bolts included.
Fits C-Class, E-Class, A-Class, CLA, AMG models. 10mm, 15mm, 20mm and 25mm. CNC machined in the UK.
Fitment specification
One Specification. Every Modern Mercedes.
5×112
Bolt pattern
66.6mm
Centre bore
M14×1.5
Bolt thread
Ball seat
Seat type
6082-T6
Aluminium grade
Most modern Mercedes-Benz and AMG models share the same 5×112 PCD and 66.6mm centre bore — from the A-Class through to the E63 AMG. One spacer specification covers the full range. Always confirm your exact fitment before ordering.
Hubcentric wheel spacers
Mercedes 5×112
Wheel Spacers
Wheel Spacers
From £89 per pair, inc. bolts
Shop now
5×112 PCD · 66.6mm centre bore · Extended wheel bolts included · CNC machined in the UK
- Fits A-Class, C-Class, E-Class, CLA, C43, C63, E63 AMG and more
- Hubcentric 66.6mm bore — no vibration, no centering rings
- Extended bolts included, matched to your chosen thickness
- 6082-T6 billet aluminium. Black anodised. Lifetime guarantee.
10mm
£89
15mm
£109
20mm
£119
25mm
£129
Shop Mercedes spacers →
Model compatibility
Mercedes and AMG Models — All 5×112
Every model below uses the same 5×112 / 66.6mm specification. One product fits all. Always confirm your PCD and centre bore before ordering.
Mercedes A-Class
W176 / W177
5×112 · 66.6mm
Mercedes A45 AMG
W176 / W177
5×112 · 66.6mm
Mercedes CLA
C117 / C118
5×112 · 66.6mm
Mercedes CLA45 AMG
C117 / C118
5×112 · 66.6mm
Mercedes C-Class
W204 / W205 / W206
5×112 · 66.6mm
Mercedes C43 AMG
W205 / W206
5×112 · 66.6mm
Mercedes C63 AMG
W204 / W205
5×112 · 66.6mm
Mercedes E-Class
W212 / W213
5×112 · 66.6mm
Mercedes E63 AMG
W212 / W213
5×112 · 66.6mm
Mercedes S-Class
W221 / W222 / W223
5×112 · 66.6mm
Mercedes AMG GT
C190 / R190
5×112 · 66.6mm
Not sure which fits?
Check before ordering
Contact us →
Always confirm before ordering
While most Mercedes-Benz models use 5×112 / 66.6mm, fitment can vary by year and specification. If you're unsure, contact us with your registration and we'll confirm the correct spacer.
Thickness & pricing
Choose Your Spacer Thickness
Four thicknesses available. Each pair ships with extended bolts matched to your chosen thickness.
| Thickness | Price per pair | Best for | Popular models |
|---|---|---|---|
| 10mm | £89 | Subtle stance improvement and conservative OEM+ fitment | A-Class, CLA, C-Class front axle |
| 15mm | £109 | Most popular — meaningful visual improvement, works on most models front and rear | C63 AMG, E63 AMG, C43 AMG |
| 20mm | £119 | Flush fitment — wheels closer to the arch line, works well on lowered cars | C63 AMG, E63 AMG rear axle |
| 25mm | £129 | Aggressive stance — for wider setups or significant tuck | E63 AMG, S-Class, AMG GT |
Mixing thicknesses
Running different thicknesses front and rear is common — for example 10mm front and 15mm rear on a C63 AMG. The product page lets you select and order multiple thicknesses in a single transaction.
Why Brightstone Engineering
Built for Mercedes. Made in Britain.
Hubcentric precision
Bored to exactly 66.6mm to match your Mercedes hub. The hub carries lateral load — not the bolts. No vibration, no centering rings required.
Bolts included
Every kit ships with extended wheel bolts matched to your chosen thickness. No separate bolt purchase needed — everything is in the box.
UK CNC machined
Every spacer machined from 6082-T6 billet aluminium in our UK workshop. Not imported, not relabelled — made to tight tolerances for road and performance fitment.
Installation
Fitting Mercedes Wheel Spacers
01
Confirm your fitment
Check your Mercedes uses 5×112 with a 66.6mm centre bore. If unsure, contact us with your registration and we'll confirm before you order.
02
Clean the hub face
Remove any dirt, corrosion or debris. The spacer must sit perfectly flat against the hub for correct hubcentric seating.
03
Locate the spacer on the hub
The spacer locates on the 66.6mm hub register and sits flush against the hub face. It should not rock once seated.
04
Refit the wheel with the supplied extended bolts
Use the extended bolts included in your kit. Torque to Mercedes factory specification using a calibrated torque wrench in a star pattern. Do not use an impact gun for final tightening.
05
Re-torque after 50–100 miles
Re-check bolt torque after the first drive to confirm the assembly has fully seated and clamping load is maintained.
FAQ
Frequently Asked Questions
Do all Mercedes models use 5×112?
Most modern Mercedes-Benz and AMG models use 5×112 with a 66.6mm centre bore. This covers A-Class, C-Class, E-Class, S-Class, CLA and most AMG variants. If you're unsure, contact us with your registration and we'll confirm.
Are extended bolts included?
Yes. Every Brightstone Mercedes spacer kit includes extended wheel bolts matched to your chosen spacer thickness. No separate bolt purchase required.
What size spacers should I fit to a C63 AMG or E63 AMG?
15mm is the most popular choice on C63 and E63 AMG — a meaningful visual improvement that keeps the car looking factory-correct. 25mm works well on cars with more aggressive setups or wider tyres. Many owners run 10mm front and 15mm rear.
Are Mercedes wheel spacers safe?
Yes, when correctly specified and installed with the correct extended bolts and torqued properly. Hubcentric spacers bored to 66.6mm locate on the hub register — the hub carries lateral load rather than the bolts. Re-torqueing after the first drive is essential.
What is the guarantee?
All Brightstone spacers carry a lifetime guarantee covering materials and manufacturing defects. UK-made — if there is an issue with the part, we stand behind it.
Continue your research
Related Guides and Products
Ready to improve your Mercedes's stance?
Mercedes 5×112 hubcentric wheel spacers from £89 per pair — bolts included. 10mm, 15mm, 20mm and 25mm. CNC machined in the UK.